Selector Lever Position Indicator
SELECTOR LEVER POSITION INDICATORDescription
Indicates selector lever position.
Component Function Check
1. CHECK SELECTOR LEVER POSITION INDICATOR (STEP 1)
1. Turn ignition switch ON.
2. Check that each position indicator lamp of the selector lever position indicator turns on when shifting the selector lever from "P" to "M" position.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Go to "Diagnosis Procedure".
2. CHECK SELECTOR LEVER POSITION INDICATOR (STEP 2)
Check that the night illumination of the selector lever position indicator turns on when setting the lighting switch in 1st position.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Go to "Diagnosis Procedure".
Diagnosis Procedure
1. CHECK MALFUNCTIONING ITEM
Which item is abnormal?
Position indicator lamp >> GO TO 2.
Illumination lamp >> GO TO 8.
2. CHECK POWER SOURCE
1. Turn ignition switch OFF.
2. Disconnect control device connector.
3. Turn ignition switch ON.
4. Check voltage between control device vehicle side harness connector terminals.
Is the inspection result normal?
YES >> GO TO 6.
NO >> GO TO 3.
3. CHECK GROUND CIRCUIT
Check continuity between control device vehicle side harness connector terminal and ground.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace damaged parts.
4. CHECK HARNESS BETWEEN CONTROL DEVICE AND BCM (STEP 1)
1. Disconnect BCM connector.
2. Check continuity between control device vehicle side harness connector terminal and BCM vehicle side harness connector terminal.
Is the inspection result normal?
YES >> GO TO 5.
NO >> Repair or replace damaged parts.
5. CHECK HARNESS BETWEEN CONTROL DEVICE AND BCM (STEP 2)
Check continuity between control device vehicle side harness connector terminal and ground.
Is the inspection result normal?
YES >> Check the following.
^ Check terminals of BCM connector and control device harness connector for damage.
^ Check connector for loose connection.
NO >> Check BCM input/output signal. Refer to BCS-46, "Reference Value". ECU Diagnosis
6. CHECK SHIFT POSITION SWITCH
Check continuity between control device harness connector terminals and selector lever position indicator connector terminals.
Is the inspection result normal?
YES >> GO TO 7.
NO >> Repair or replace damaged parts.
7. CHECK SELECTOR LEVER POSITION INDICATOR
Check selector lever position indicator. Refer to "Component Inspection".
Is the inspection result normal?
YES >> Check the following.
^ Check terminals of control device harness connector and selector lever position indicator connector for damage.
^ Check connector for loose connection.
NO >> Repair or replace damaged parts.
8. CHECK POWER SOURCE
1. Turn ignition switch OFF.
2. Disconnect control device connector.
3. Turn ignition switch ON.
4. Check voltage between control device vehicle side harness connector terminals.
Is the inspection result normal?
YES >> GO TO 9.
NO >> Check illumination circuit.
9. CHECK SHIFT POSITION SWITCH
Check continuity between control device harness connector terminals and selector lever position indicator connector terminals.
Is the inspection result normal?
YES >> GO TO 7.
NO >> Repair or replace damaged parts.
Component Inspection
1. CHECK SELECTOR LEVER POSITION INDICATOR
Check that selector lever position indicator lamps turn on.
CAUTION: Connect the fuse between the terminals when applying the voltage.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace the selector lever position indicator.