Transfer

DTC U1000 CAN COMM CIRCUIT

DIAGNOSTIC PROCEDURE
^ Check the following if "CAN COMM CIRCUIT [U1000]" is detected in self-diagnostic results of CONSULT-III.

1. CHECK CAN COMMUNICATION CIRCUIT

With CONSULT-III
1. Turn ignition switch "ON" and start engine.
2. Select "SELF-DIAG RESULTS" mode for "ALL MODE AWD/4WD" within CONSULT-III
3. Perform the self-diagnosis.
Is the "CAN COMM CIRCUIT [U1000]" displayed?
YES >> Print out CONSULT-III screen and go to LAN-43, "CAN System Specification Chart". CAN System Specification Chart
NO >> INSPECTION END