Trunk / Liftgate Weatherstrip: Service and Repair

Removal and Installation of Back Door Weather-strip

BL-144 Exploded View:

REMOVAL
Pull up and remove engagement with body from weather-strip joint.

CAUTION: After removal, do not pull strongly on the weather-strip.

INSTALLATION
1. Working from the upper section, align weather-strip mark with vehicle center position mark and install weather-strip onto the vehicle.
2. For the lower section, align the weather-strip seam with center of the striker.
3. After installation, pull the weather-strip gently to ensure that there is no loose section.

NOTE: Make sure the weather-strip is fit tightly at each corner and back door rear plate.