Consult-III Function (Auto Drive POS.)

AUTOMATIC DRIVE POSITIONER

CONSULT-III Function (AUTO DRIVE POS.)






SELF-DIAGNOSIS RESULTS
Display Item List

B2112-B2115 / U1000:

B2116-B2128:

NOTE:
- The displays of CAN communication and P range switch display error detecting condition from memory erase to the present on "TIME".
- If error is detected in the past and present error is detected, "CRNT" is displayed.
- If error is detected in the past and present error is not detected, "PAST" is displayed.
- If error has never been detected, nothing is displayed on "TIME".
- Any items other than CAN communication and P range switch count error detection frequency occurred after erase history to "1-127".
- If error was detected in the past, error detection frequency from memory erase to the present is displayed on "TIME".
- If error has never been detected, nothing is displayed on "TIME".
- Can clear the detected memory.
Normal: Clear memory in normal condition, history is erased and nothing is displayed on "TIME".
Error: Clear memory in error condition, error is detected again and "1" is displayed on "TIME".

DATA MONITOR
Selection from Menu









ACTIVE TEST

CAUTION: During vehicle driving, do not perform active test.

NOTE: If active test is performed, reset seat memory and key fob interlock drive positioner after performing work.

Display Item List