With CONSULT-III
Self-Diagnostic FunctionWITH CONSULT-III
1. Go to operation check after asking the customer for symptom information. Refer to ACS-11, "ICC System Running Test". Action Test
2. Stop vehicle, turn ignition switch OFF, then connect CONSULT-III.
3. With engine started, check "Self Diagnostic Result" of ICC system.
4. Self-diagnostic result appears on screen. If "NO DTC..." is shown, check ICC warning lamp. If any malfunction is indicated, GO TO step 5.
5. According to ACS-35, "Diagnostic Trouble Code (DTC) Chart", perform appropriate check, and repair or replace malfunctioning part as necessary.
6. Turn ignition switch OFF.
7. Start the engine and select "Self Diagnostic Result" of ICC system, and erase DTC.
NOTE: If the memory does not erase, go to 5.
8. Perform ICC system running test (drive vehicle with ICC system ON), and make sure that ICC warning lamp does not illuminate.