Confirmation/Adjustment Mode

Confirmation/Adjustment Mode

OPERATION PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.




3. While pressing the "4" button, turn the volume control dial clockwise or counterclockwise for 30 clicks or more. (When the self-diagnosis mode is started, a short beep will be heard.)
- Shifting from current screen to previous screen is performed by pressing "BACK" button.




4. The initial trouble diagnosis screen will be shown, and items "Self Diagnosis (DCU)", "Confirmation/Adjustment" and "CAN DIAG SUPPORT MONITOR" will become selective.
5. Select "Confirmation/Adjustment".




6. Each diagnosis is shown by selecting each screen switch on Confirmation/Adjustment screen.

DISPLAY DIAGNOSIS
Color tone and shading of the display control unit-generated image can be checked by the display of a color bar and a gray scale.






- If RGB signal is malfunctioning, the tint of the color bar display is as follows.

R (red) signal error: Light blue (Cyan) tint
G (green) signal error: Purple (Magenta) tint
B (blue) signal error: Yellow tint

VEHICLE SIGNALS




A comparison check can be made of each actual vehicle signal and the signals recognized by the display control unit.

NOTE: In case of confirming light signal, set the following D/N mode to ON/OFF of lighting switch (normal setting).

- OFF: D (Day mode)
- ON: N (Night mode)

Unless above setting, light signal (ON/OFF) may not be accurately displayed.






AUTO CLIMATE CONTROL
Refer to ATC-43, "Self-Diagnosis Function". Self-Diagnosis Function