Daytime Light System
Terminal and Reference Value for BCMCAUTION:
- Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal switch and wiper switch OFF not to be fluctuated by overloaded.
- Turn wiper intermittent dial position to 4 except when checking waveform or voltage of wiper intermittent dial position. Wiper intermittent dial position can be confirmed on CONSULT-III. Refer to LT-103, "CONSULT-III Functions (BCM)". Initial Inspection and Diagnostic Overview
Terminal And Reference Value For BCM (Part 1):
Terminal And Reference Value For BCM (Part 2):
Terminal And Reference Value For BCM (Part 3):
