Front Suspension

On-Vehicle Inspection and Service
Make sure the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.

INSPECTION LOWER BALL JOINT END PLAY
1. Set front wheels in a straight-ahead position. Do not depress brake pedal.
2. Place an iron bar or similar tool between transverse link and steering knuckle.
3. Measure axial end play by prying it up and down.
Axial end play: 0 mm (0 in)

CAUTION: Be careful not to damage ball joint boot.

STRUT INSPECTION
^ Check strut for oil leakage, damage and replace if there are.