Yaw Rate Sensor: Service and Repair
Removal and InstallationREMOVAL
1. Remove center console.
2. Disconnect G sensor harness connector.
3. Remove G sensor mounting bolts. Then remove G sensor from vehicle.
CAUTION:
^ Do not drop or strike G sensor, because it has little endurance to impact.
^ Do not use power tool etc., because G sensor is weak for the impact.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
^ Do not drop or strike G sensor, because it has little endurance to impact.
^ After performing above works, calibrate decel G sensor (AWD models). Refer to "Calibration of Decel G Sensor (AWD Models)". Refer to AWD.