Back Door

Back Door Assembly

REMOVAL
1. Remove roof rear garnish assembly.




2. Disconnect the back door harness connector and AV antenna feeder.
3. Washer hose is separated in the connection part.




4. Support the back door lock with a proper material to prevent it from falling.

WARNING: Body injury may occur if no supporting rod is holding the back door open when removing the damper stay.




5. Remove back door stay on back door.




6. Remove back door hinge mounting nuts on the back door and remove back door assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installing, check operation.
- After installing, perform fitting adjustment. Refer to BL-141, "Fitting Adjustment". Adjustments