Inside Mirror

INSIDE MIRROR

Removal and Installation






REMOVAL
1. Remove inside mirror cover.
2. Remove inside mirror finisher.
3. Remove TORX bolt from mirror base.
4. Slide the mirror base upward to remove.
5. Disconnect the connector.






NOTE: Insert minus deriver (A) under the inside mirror (1). Slide the inside mirror to the upper side while pushing the pawl downward.

CAUTION:
- Do not use excessive force to remove the inside mirror because it is inserted tightly into the mirror base.
- Do not reuse the inside mirror disassembled from mirror base.

INSTALLATION
Install in the reverse order of removal.


COMPASS
For reset of compass, refer to DI-94, "System Description". Description and Operation

CAUTION:
- When inserting the inside mirror into mirror base, be sure to push the pawl until it get connected to the mirror base.
- Apply Genuine Mirror Adhesive or equivalent to bonding surface of mounting bracket.