Rear

REAR SEAT

Removal and Installation









REMOVAL




1. Pull the lock at the front bottom of the seat cushion forward (1 for each side), and pull the seat cushion upward to release the wire from the plastic hook, then pull the seat cushion forward to remove.





2. Remove the seatback mounting nuts.





3. Remove the seatback mounting bolt and nut.
Remove the remote control wire.

INSTALLATION
Install in the reverse order of removal.

NOTE: After rear wheel house finisher assembly is remove the seatback is installed.

REMOVAL OF REMOTE CONTROL LEVER





1. Remove the rear seat.
2. Remove the luggage side finisher assembly.
3. Remove the remote control lever.
4. Remove the remote control lever mounting bolt.
5. Remove the remote control lever assembly.

INSTALLATION OF REMOTE CONTROL LEVER
Install in the reverse order of removal.