Unified Meter and A/C AMP

Unified Meter And A/C AMP Schematic






UNIFIED METER AND A/C AMP

System Description
- For the unified meter and A/C amp., the signal required for controlling the combination meter are integrated in the A/C auto amp.
- The unified meter and A/C amp. corresponds to a CONSULT-III function (self-diagnosis results, CAN diagnosis support monitor, data monitor).

COMBINATION METER CONTROL FUNCTION
- Unified meter and A/C amp. receives necessary information for combination meter from each unit by CAN communication.
- Unified meter and A/C amp. transmits a signals with communication line (TX, RX) between unified meter and A/C amp. and combination meter.






A/C AUTO AMP. FUNCTION
Unified meter and A/C amp. controls each operation for A/C auto amp.

OTHER FUNCTIONS

Drive Computer Function
The signals required for the distance to empty (DTE) display are centralized in the unified meter and A/C amp., converted into data, and transmitted to the display unit (without NAVI) and display control unit (with NAVI) using CAN communication.

Signal Buffer Function
Unified meter and A/C amp. transmits each signal to other units with CAN communication.