Tail Lamp: Service and Repair

Removal and Installation

REMOVAL

Rear Fender Side




1. Remove bumper side cover A.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting bolts.
4. Pull rear combination lamp toward side of the vehicle and remove from the vehicle.

INSTALLATION
Installation is the reverse order of removal.

CAUTION: Seal packing cannot be reused.

Rear combination lamp (rear fender side) mounting nut Torque: 3.2 N.m (0.33 kg-m, 28 in-lb)
Rear combination lamp (Back Door side) mounting nut Torque: 5.5 N.m (0.56 kg-m, 49 in-lb)