Rear Axle

REAR WHEEL HUB AND KNUCKLE

On-Vehicle Inspection
Make sure the mounting conditions (looseness, back lash) of each component and component status (wear, damage) are normal.

WHEEL BEARING INSPECTION
With the vehicle raised, inspect the following.
^ Move wheel hub in the axial direction by hand. Check that there is no looseness of front wheel bearing.
Axial end play: 0.05 mm (0.002 in) or less
^ Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there are any irregular conditions, replace wheel hub and bearing assembly.