Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started in "P" or "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D" or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
WITH CONSULT-III
^ Perform self-diagnosis.
Without CONSULT-III
^ Perform self-diagnosis. Refer to AT-91, "Diagnosis Procedure without CONSULT-III". Diagnosis Procedure Without Consult-III
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to AT-102. P0705
NO >> GO TO 2.
2. CHECK A/T POSITION
Check the A/T position.
OK or NG
OK >> GO TO 3.
NG >> Adjust A/T position. Refer to AT-207, "Adjustment of A/T Position". Adjustments
3. CHECK STARTING SYSTEM
Check starting system. Refer to SC-8. Description and Operation
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.