Front Center Console

FRONT CENTER CONSOLE

Exploded View

IP-19 Exploded View:

Removal and Installation

REMOVAL
1. Move front seats forward.
2. Disconnect the battery negative terminal.




3. Remove A/T finisher and front center console upper screws.
4. Remove control device.
5. Remove instrument lower panel RH and glove box assembly.
6. Remove center console lower cover RH/LH, then remove front center console lower screws.
7. Open the console lid assembly and remove console bin mat, then remove the rear inside screws.
8. Remove lower front center console screws at the rear.
9. Release front center console from floor and tilt to disconnect electrical connectors.
10. Carefully remove front center console assembly through rear door opening.

CAUTION: Always use an assistant to steady the front center console assembly during removal from vehicle interior.

INSTALLATION
Installation is in the reverse order of removal.

DISASSEMBLY AND ASSEMBLY

FRONT CENTER CONSOLE

Exploded View

IP-21 Exploded View (Part 1):

IP-21 Exploded View (Part 2):

Disassembly and Assembly

DISASSEMBLY
1. Remove latch from console lid.
2. Remove console lid and lid hinge.
3. Remove console bin.
4. Disconnect electrical harness connector from DVD player (if equipped).
5. Remove rear upper finisher.
6. Remove rear cup holder assembly.
7. Remove rear finisher assembly, tilt aside and disconnect electrical connectors.
8. Remove console power socket, then disconnect electrical connector.
9. Remove screws on each side, release clips and remove console covers RH/LH.
10. Remove storage compartment and mask.
11. Remove console front bracket.
12. Remove heat duct and rear console duct.
13. Remove console rear bracket.

ASSEMBLY
Assembly is in the reverse order of disassembly.