Manual Function

MANUAL FUNCTION

MANUAL FUNCTION : System Diagram






MANUAL FUNCTION : System Description

OUTLINE
The driving position (seat, pedal assembly, steering wheel and door mirror position) can be adjusted manually with power seat switch, pedal adjusting switch, ADP steering switch and door mirror remote control switch.

OPERATION PROCEDURE
1. Turn ignition switch ON.
2. Operate power seat switch, pedal adjusting switch, ADP steering switch or door mirror remote control switch.
3. The driver seat, pedal assembly, steering wheel or door mirror operates according to the operation of each switch.

DETAIL FLOW

Seat






Adjustable pedals






Tilt steering wheel






Door Mirror






NOTE: The door mirrors can be operated manually when ignition switch is in either ACC or ON position. The ignition switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and from the driver seat control unit to the automatic drive positioner control unit via UART communication.

MANUAL FUNCTION : Component Description

CONTROL UNITS









INPUT PARTS

Switches






Sensors






OUTPUT PARTS