Headlamp: Service and Repair

Removal and Installation

FRONT COMBINATION LAMP ASSEMBLY

CAUTION:
- Disconnect battery negative terminal before touching xenon bulb or headlamp wiring harness assembly.
- Turn headlamp switch OFF before disconnecting headlamp harness connector.
- Do not touch bulb by hand right after being turned off. Burning may result.
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
- Do not turn xenon bulb ON when xenon bulb is removed from front combination lamp assembly.
- After installing the bulb, be sure to install the bulb socket securely to ensure watertightness.
- Do not leave bulb out of front combination lamp assembly for a long time because dust, moisture, smoke, etc. may affect the performance of the lamp. When replacing bulb, be sure to replace it with a new one.

Removal
1. Disconnect battery negative terminal.
2. Disconnect front combination lamp assembly.
3. Remove front fascia.




4. Remove front combination lamp assembly bolts.
5. Remove front combination lamp assembly.

Installation
Installation is in the reverse order of removal.

Disassembly and Assembly

FRONT COMBINATION LAMP ASSEMBLY

EXL-106 Exploded View:

Disassembly
1. Remove ballast.
2. Release xenon bulb retaining spring and remove xenon bulb.
3. Turn high beam bulb counterclockwise to unlock and remove high beam bulb.
4. Turn parking lamp bulb (inner) socket counterclockwise to unlock and remove parking lamp bulb.
5. Turn parking lamp bulb (outer) socket counterclockwise to unlock and remove parking lamp bulb.
6. Turn side marker lamp (front) bulb socket counterclockwise to unlock and remove side marker lamp (front) bulb.

Assembly
Assembly is in the reverse order of disassembly.