Electronic Brake Control Module: Service and Repair
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNITADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Description
After replacing the ABS actuator and electric unit (control unit), perform the following procedures:
^ Neutral position adjustment for the steering angle sensor
^ Calibration of the decel G sensor
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement
1.PERFORM THE NEUTRAL POSITION ADJUSTMENT FOR THE STEERING ANGLE SENSOR
Perform the neutral position adjustment for the steering angle sensor.
>> Refer to BRC-8, "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION: Special Repair Requirement", GO TO 2. Testing and Inspection
2.PERFORM CALIBRATION OF THE DECEL G SENSOR
Perform calibration of the decel G sensor.
>> Refer to BRC-9, "CALIBRATION OF DECEL G SENSOR: Special Repair Requirement". Service and Repair