LDP TCM CAM CAN CIR2

U0101 LDP) TCM CAM CAN CIR2





DTC Logic

DTC DETECTION LOGIC

DTC DETECTION LOGIC:

DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
- GO TO 2.
2.DTC CONFIRMATION
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC "U0101" detected?
YES - Refer to LDP TCM CAM CAN CIR2.
NO - Refer to Intermittent Incident.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF TCM
Perform self-diagnosis of TCM with CONSULT-III.
Is any DTC detected?
YES - GO TO 2.
NO - GO TO 4.
2.TCM TROUBLE DIAGNOSIS
Perform trouble diagnosis of TCM. Refer to Testing and Inspection.
- GO TO 3.
3.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0101" erased?
YES - INSPECTION END
NO - Replace ABS actuator and electric unit (control unit).
4.PROVISIONAL REPLACEMENT OF TCM
Remove TCM. Install a normal TCM.
- GO TO 5.
5.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0101" erased?
YES - Replace TCM.
NO - Replace ABS actuator and electric unit (control unit).