Removal and Installation

FRONT CAMERA


Removal and Installation


REMOVAL
1. Remove harness clip and connector clip from front camera bracket.
2. Remove front emblem. Refer to Exploded View.
3. Remove front emblem mounting screws.
4. Remove front camera.

INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to Description Special Repair Requirement, "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement".

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.