Removal and Installation

BACK DOOR


BACK DOOR HINGE : Removal and Installation


REMOVAL
1. Remove luggage side lower finisher and luggage side upper finisher. Refer to Removal and Installation.
2. Using a remover tool, remove headlining clip at the rear side of headlining, and then remove rear side of headlining. Refer to Removal and Installation (NORMAL ROOF), Removal and Installation (SUNROOF).
3. Remove back door assembly. Refer to Removal and Installation.
4. Remove back door hinge mounting nuts (body side), and then remove back door hinge.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Check back door open/close operation after installation.
- Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
- When removing and installing back door assembly, perform the fitting adjustment. Refer to .
- After installation, apply touch-up paint (the body color) onto the head of back door hinge mounting nuts.