Auto Door Lock Operation Does Not Operate

AUTO DOOR LOCK OPERATION DOES NOT OPERATE


Description


NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Refer to Diagnosis and Repair Work Flow.




AUTO DOOR LOCK OPERATION DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"
Check "AUTO LOCK SET" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "AUTO LOCK SET" setting in "WORK SUPPORT".
2.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.