Rear Subframe: Testing and Inspection

REAR SUSPENSION MEMBER


Inspection


INSPECTION AFTER REMOVAL
Check rear suspension member for deformation, cracks, or any other damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
1. Adjust parking brake operation (stroke). Refer to Inspection and Adjustment.
2. Check wheel alignment. Refer to Inspection.
3. Adjust neutral position of height sensor (with xenon head lamp). Refer to Description Special Repair Requirement Description Special Repair Requirement Description Special Repair Requirement
4. Adjust neutral position of steering angle sensor. Refer to Description Special Repair Requirement Description Special Repair Requirement