Removal and Installation

REAR SEAT


Removal and Installation


REMOVAL

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the seat cushion.





- Pull the lock lever (1) at the front bottom of the seat cushion forward (1 for each side), and pull the seat cushion upward to release the wire (2) from the seat cushion hook. Then pull the seat cushion forward the remove
- Remove the seat cushion from vehicle.
2. Remove the seatback.
- Remove the luggage floor finisher front LH and RH. Refer to Exploded View.
- Disconnect the rear seat harness connectors.
- With power return seat model
LH seatback





Disconnect the rear seat harness connectors (A).
RH seatback





Disconnect the rear seat harness connector (A).
- Without power return seat model
LH seatback





Disconnect the rear seat harness connectors (A).
RH seatback





Disconnect the rear seat harness connector (A).
- Push the seatback lock pin (A).





- Remove the seatback mounting nuts (B), (C) and bolt (D).
- Remove the center seat belt anchor bolt. (RH seatback only)
Refer to Exploded View.
- Remove the seatback from vehicle.

INSTALLATION
1. Install the rear seatback mounting nuts (1), (2), (3).





2. Lock the seatback striker (4).
3. Install the rear seatback mounting bolt (5).
4. Pull the rear seatback lock pin (6).

CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.
- When removing and installing, 2 workers are required so as to prevent it from dropping.