Cylinder Block Assembly: Specifications

SERVICE DATA AND SPECIFICATIONS (SDS)


Cylinder Block


CYLINDER BLOCK









AVAILABLE PISTON






PISTON RING






PISTON PIN






CONNECTING ROD






CRANKSHAFT










CRANKSHAFT MAIN BEARING CAP BOLTS
Tighten lower cylinder block bolts (No. 17 to 26) in numerical order as shown in the figure.
Torque: 25.0 Nm (2.6 kg-m, 18 ft-lb)





- Repeat previous step.

Tighten lower cylinder block bolt (No. 1 to 16) in numerical order as shown in the figure.

Torque: 35.3 Nm (3.6 kg-m, 26 ft-lb)

Turn lower cylinder block bolt (No. 1 to 16) 90 degrees clockwise (angle tightening).

CONNECTING ROD BOLTS
Tighten connecting rod bolts.
Torque: 28.4 Nm (2.9 kg-m, 21 ft-lb)

Completely loosen connecting rod bolts.

Torque: 0 Nm (0 kg-m, 0 ft-lb)

Tighten connecting rod bolts.

Torque: 24.5 Nm (2.5 kg-m, 18 ft-lb)

Then turn connecting rod bolts 90 degrees clockwise (angle tightening).

CRANKSHAFT PULLEY BOLT
Tighten crankshaft pulley bolt.
Torque: 44.1 Nm (4.5 kg-m, 33 ft-lb)
- Turn an additional 90 degrees