Off Position Warning Does Not Operate

OFF POSITION WARNING DOES NOT OPERATE


Description


NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Refer to Diagnosis and Repair Work Flow.
- Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm the list above twice in order to ensure proper operation. Refer to Warning Function.
- Door lock function is normal.




OFF POSITION WARNING DOES NOT OPERATE


Diagnosis Procedure

1.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES - GO TO 2.
NO - Check DTC for BCM. Refer to Testing and Inspection.
2.CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter). Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK DOOR SWITCH
Check door switch (driver side). Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.