Assembly

FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR


Assembly






1. Install drive plates, driven plates, dish plate, retaining plate and snap ring to input clutch drum.

CAUTION:
Check order of plates.





2. Install snap ring to input clutch drum with a flat-bladed screwdriver.
3. Install needle bearing to input clutch assembly.






CAUTION:
Check the direction of needle bearing. Refer to Transmission Assembly.





4. Install O-ring and seal rings to input clutch assembly.





5. Install snap ring to front carrier assembly.

CAUTION:
Never expand snap ring excessively.





6. Install needle bearing to front carrier assembly.

CAUTION:
Check the direction of needle bearing. Refer to Transmission Assembly.





7. Install bearing race to front carrier assembly.
8. Install front carrier assembly to input clutch assembly.





9. Compress snap ring with two flat-bladed screwdrivers.
10. Install front carrier assembly and input clutch assembly to rear internal gear.