Removal and Installation

CAN GATEWAY


Removal and Installation


CAUTION:
Before replacing CAN gateway, perform "READ CONFIGURATION" to save or print current vehicle specification.

Refer to Description Special Repair Requirement Description, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (CAN GATEWAY) : Description".

REMOVAL
1. Remove instrument lower panel RH. Refer to Exploded View.





2. Remove CAN gateway mounting screw (A).
3. Remove CAN gateway (1) and disconnect the connector.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Be sure to perform "WRITE CONFIGURATION" when replacing CAN gateway.