Assembly

FRONT DRIVE SHAFT AND DRIVE CHAIN


VQ35HR : Assembly

1. Install plug to front drive shaft.

CAUTION:
Never reuse plug.





2. Install front drive shaft front bearing with the drift (A) [SST:
ST33200000 (J-26082)].





3. Install front drive shaft rear bearing with the drift (A) [SST:
KV38104010 ( -- )].





4. Set drive chain to front drive shaft.

CAUTION:
Identification mark (A) of drive chain should be in the side of front bearing (1) of front drive shaft.
5. Install drive chain to main shaft, and then install front drive shaft.

CAUTION:
Never use tools. Always install by hand.
6. Install front case to rear case. Refer to Assembly.