SCS
U1000 CAN COMM CIRCUIT
Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detectability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-H line, CAN-L line) allowing a high rate of information communication with less wiring. Each control unit communicates data but selectively reads required data only.
DTC Logic
DTC DETECTION LOGIC
DTC Detection Logic:
DTC CONFIRMATION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Turn the ignition switch OFF to ON.
2. Perform E-SUS control unit self-diagnosis.
Is DTC "U1000" detected?
YES - Proceed to diagnosis procedure. Refer to CAN COMM Circuit.
NO - INSPECTION END
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform E-SUS control unit self-diagnosis.
Is DTC "U1000" detected?
YES - CAN specification chart. Refer to CAN System Specification Chart.
NO - INSPECTION END