Keyless Entry Transmitter: Testing and Inspection
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Description
NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Refer to Diagnosis and Repair Workflow.
- Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm the list above twice in order to ensure proper operation. Refer to Warning Function.
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Diagnosis Procedure
1.CHECK "LO- BATT OF KEY FOB WARN" SETTING IN "WORK SUPPORT"
Check "LO- BATT OF KEY FOB WARN" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "LO- BATT OF KEY FOB WARN" setting in "WORK SUPPORT".
2.CHECK INTELLIGENT KEY BATTERY
Check Intelligent Key battery. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK COMBINATION METER DISPLAY
Check combination meter display. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK INSIDE KEY ANTENNA
Check inside key antenna. Refer to B2621 (instrument center). Refer to B2622 (console). Refer to B2623 (luggage room).
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.