CONSULT-III Function

DIAGNOSIS SYSTEM (RAS CONTROL UNIT)


CONSULT-III Function


FUNCTION
CONSULT-III can display each diagnostic item using the diagnostic test modes shown below.






SELF-DIAG RESULT MODE

Display Item List
Refer to Testing and Inspection.

DATA MONITOR MODE

Display Item List






ACTIVE TEST MODE

Description
- RAS actuator assembly activation is checked according to the control signal from CONSULT-III.
- The control signal forcibly activates (ON/OFF) RAS actuator assembly, performs the self-diagnosis and checks each sensor in "SELF DIAGNOSTIC MODE".

CAUTION:
Perform the active test while the vehicle is stopped.