Diagnosis Procedure

COMBINATION SWITCH


Diagnosis Procedure

1. CHECK LIGHT and TURN SIGNAL SWITCH
Check operation with normal light and turn signal switch installed.
Does it operate normally?
YES - Replace light and turn signal switch. Refer to Service and Repair.
NO - GO TO 2
2. CHECK WIPER and WASHER SWITCH
Check operation with normal wiper and washer switch installed.
Does it operate normally?
YES - Replace wiper and washer switch. Refer to Service and Repair.
NO - GO TO 3
3. CHECK SWITCH BASE (SPIRAL CABLE)
Check operation with normal switch base (spiral cable) installed.
Does it operate normally?
YES - Replace switch base (spiral cable). Refer to Service and Repair.
NO - Combination switch is normal.