Headlamp Bulb: Service and Repair

HEADLAMP


Bulb Replacement


CAUTION:
- Disconnect battery negative terminal before touching xenon bulb or headlamp wiring harness assembly.
- Turn headlamp switch OFF before disconnecting headlamp harness connector.
- Do not touch bulb by hand right after being turned off. Burning may result.
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
- Do not turn xenon bulb ON when xenon bulb is removed from front combination lamp assembly.
- After installing the bulb, be sure to install the bulb socket securely to ensure watertightness.
- Do not leave bulb out of front combination lamp assembly for a long time because dust, moisture, smoke, etc. may affect the performance of the lamp. When replacing bulb, be sure to replace it with a new one.

HEADLAMP (OUTER SIDE), FOR LOW BEAM

Removal
1. Position fender protector aside.
2. Turn headlamp switch OFF.
3. Disconnect battery negative terminal.
4. Remove ballast.
5. Disconnect headlamp electrical connector.
6. Release bulb retaining spring and pull bulb straight out.

Installation
Installation is in the reverse order of removal.

HEADLAMP (INNER SIDE), FOR HIGH BEAM

Removal
1. Turn headlamp switch OFF.
2. Disconnect headlamp electrical connector.
3. Turn the bulb counterclockwise to remove it.

Installation
Installation is in the reverse order of removal.

FRONT PARKING LAMP (INNER OR OUTER)

Removal
1. Turn the bulb socket counterclockwise to unlock it.
2. Pull the bulb to remove it from the socket.

Installation
Installation is in the reverse order of removal.

SIDE MARKER LAMP (FRONT)

Removal
1. Position fender protector aside.
2. Turn the side marker lamp (front) bulb socket counterclockwise and remove side marker lamp (front) bulb socket.
3. Pull to remove side marker lamp (front) from the side marker lamp (front) bulb socket.

Installation
Installation is in the reverse order of removal.