Removal and Installation

FRONT GRILLE


Removal and Installation


REMOVAL

CAUTION:
Apply protection tape around outer circumference of front grille (bumper fascia side).
1. Fully open hood.





2. Remove front grille (1) fixing clips (A) with remover tool.





3. Remove hood seal assembly (front) (1) fixing clips with remover tool, and then remove hood seal assembly (front).

Circle : Clip






4. Pull front grille (1) horizontally toward vehicle front, and then remove front grille.

Triangle: Pawl






5. Remove front camera harness clips (A).
6. Disconnect front camera harness connector (B). (with FRONT
CAMERA)
7. Remove the following parts after removing front grille.
- Front camera. (with FRONT CAMERA) Removal and Installation.
- Front emblem

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Perform camera image calibration. Description.