Inspection Procedure

ACTION TEST


Inspection Procedure


WARNING:
Be careful of traffic conditions and safety around the vehicle when performing road test.

CAUTION:
- Fully understand the following items well before the road test;
- Precautions: Precaution For LDW/LDP System Service.
- System description for LDW: System Description.
- System description for LDP: System Description.
- Normal operating condition: LDW and LDP.
1.ACTION TEST FOR LDW
1. Drive the vehicle.
2. Turn LDW switch ON (LDW ON indicator is ON).

NOTE:
LDP system is OFF.
3. Check the LDW operation according to the following table.






- GO TO 2.
2.CHECK LDP SYSTEM SETTING
1. Start the engine.
2. Check that the LDP system setting can be enabled/disabled on the navigation screen.
3. Turn OFF the ignition switch and wait for 5 seconds or more.
4. Check that the previous setting is saved when the engine starts again.
- GO TO 3.
3.ACTION TEST FOR LDP
1. Enable the setting of the LDP system on the navigation screen.
2. Turn LDP switch ON (LDP ON indicator lamp is ON).

NOTE:
LDW system is OFF.
3. Check the LDP operation according to the following table.






- WORK END