Assembly

FRONT DRIVE SHAFT AND DRIVE CHAIN


Assembly






1. Install front drive shaft front bearing with the drift (A) [SST:
ST33200000 (J-26082)].





2. Install front drive shaft rear bearing with the drift (A) [SST:
KV38104010 ( -- )].





3. Install drive chain to front drive shaft.

CAUTION:
Identification mark (A) of drive chain should be in the side of front bearing (1) of front drive shaft.





4. Install drive chain to mainshaft, and then install by tapping front drive shaft with plastic hammer. Press-fit rear bearing of front drive shaft to rear case.

CAUTION:
Never tap drive chain.
5. Install front case to rear case. Assembly.