Welcome Light Function

INTELLIGENT KEY SYSTEM


WELCOME LIGHT FUNCTION : System Description


CONDITION OF SEARCHING
If all following conditions are satisfied, BCM search Intelligent Key by outside key antenna (front outside handle LH/RH and back door). BCM has timer to search for 14 days (every 0.3 sec.). If run the engine, the timer will be reset.






OPERATION PROCEDURE
BCM search outside key antenna (front outside handle LH/RH and back door) detection area. If registered
Intelligent Key is detected, BCM turn ON the room lamp and puddle lamp.
For detailed description after turning ON the lamps, System Description.

SYSTEM SETTING PROCEDURE
Setting of welcome light function can be changed by following procedure. (for system setting by CONSULT-III:
CONSULT-III Function (BCM - Intelligent Key).)
1. Confirm Intelligent Key is removed from key slot.
2. Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
3. Confirm sounds of buzzer (combination meter).

Pi, Pi, Pi... (approx. 1.2 sec.): Welcome light function is OFF.
Pi, Pi, Pi...(approx. 2.4 sec.): Welcome light function is ON.