Disassembly and Assembly

CENTER CONSOLE ASSEMBLY


Disassembly and Assembly


CAUTION:
When disassembling, always use a remover tool that is made of plastic.

DISASSEMBLY
1. Remove console lid assembly.
- Open the console lid.





- Remove console mask (1) fixing pawls with remover tool (A).

Triangle: Pawl






- Remove console lid assembly (1) fixing screws (A), and then remove console lid assembly.
2. Remove console pocket.
3. Reverse a center console assembly.





4. Remove console sub harness.
- Remove console sub harness (1) fixing screws (A).
- Remove console sub harness fixing clip (B).
- Disconnect switch connectors.





5. Remove switch panel.
- Remove switch panel (1) fixing screws (A).
- Pull back switch panel.





6. Remove console pad LH.
- Remove console pad LH (1) fixing screws (A).
- Pull the console pad LH crosswise.





7. Remove console pad RH.
- Remove console pad RH (1) fixing screws (A).
- Pull the console pad RH crosswise.





8. Remove console center bracket.
- Remove console center bracket (1) fixing screws (A).
- Pull up console center bracket.





9. Remove console upper bracket.
- Remove console upper bracket (1) fixing screws (A).
- Pull up console upper bracket.





10. Remove cup holder assembly.
- Remove cup holder assembly (1) fixing screws (A).
- Pull up cup holder assembly.





11. Remove power outlet (1). Removal and Installation.
12. Remove auxiliary input jacks (2). Without Navigation.
13. Remove USB connector (3). Without Navigation.





14. Remove console finisher.
- Disengage pawls while pulling console finisher (1).
- Pull up console finisher.

Triangle: Pawl


ASSEMBLY
Assemble in the reverse order of disassembly.