Diagnosis Procedure

DOOR LOCK ACTUATOR


REAR RH : Description

Locks/unlocks the door with the signal from BCM.




DOOR LOCK ACTUATOR


REAR RH : Diagnosis Procedure

1.CHECK DOOR LOCK ACTUATOR SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear door lock assembly RH.
3. Check voltage between rear door lock assembly RH harness connector and ground.





Is the inspection result normal?
YES - Replace rear door lock assembly RH. Removal and Installation.
NO - GO TO 2.
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and rear door lock assembly RH harness connector.





3. Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES - Replace BCM. Removal and Installation.
NO - Repair or replace harness.