Parking Brake Shoe

PARKING BRAKE SHOE


Inspection and Adjustment


INSPECTION AFTER REMOVAL

Lining Thickness Inspection





- Check thickness (A) of lining.

Limit
A : Refer to PB-10, "Parking Drum Brake". Parking Drum Brake

Drum Inner Diameter Inspection





- Check inner diameter (B) of drum.

Limit
B : Refer to PB-10, "Parking Drum Brake". Parking Drum Brake

Other Inspections
Check the following items, and replace the parts if necessary.
- Lining for excessive wear, damage, and peeling.
- Brake shoe sliding surface for excessive wear and damage.
- Anti-rattle pin and retainer for excessive wear, damage and rust.
- Adjuster spring, return spring and anti-rattle spring for settling, excessive wear, damage, and rust.
- Adjuster for smoothness.
- Toggle lever for excessive wear, damage and rust.
- Visually check inside of the drum for excessive wear, cracks, and damage with a pair of vernier calipers.

ADJUSTMENT AFTER INSTALLATION
1. Adjust the parking brake pedal stroke. Parking Brake System.
2. Check a drag of the parking brake.

CAUTION:
If any drag is found, inspection the rear disc brake. Rear Disc Brake, "BRAKE CALIPER ASSEMBLY
: Inspection".
3. Adjust the parking brake shoe. Adjustments.