Removal and Installation

AIR BREATHER HOSE


2WD : Removal and Installation


REMOVAL
1. Remove air cleaner case (RH). Exploded View.
2. Remove exhaust front tube and center muffler with power tool. Exploded View.
3. Remove exhaust mounting bracket. Exploded View.
4. Remove three way catalyst (right bank). Exploded View.
5. Remove air breather hose.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
- When installing an air breather hose, be careful not to be crushed or blocked by folding or bending the hose.
- When inserting an air breather hose to the air breather tube, be sure to insert it fully until its end reaches the radius curve end.
- Ensure clips are securely installed to brackets when installing air breather hose to brackets.
- When inserting air breather hose to air breather box, be sure to insert it fully until its end reaches the stop.
- Install air breather hose to air breather box so that the paint mark is facing backward.