Removal and Installation

REAR SEAT


Removal and Installation


REMOVAL

CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.
- Always remove seat back while the reclining device is in the locked condition. Never release the locked condition after removing seat back.
1. Remove the seat cushion.





- Pull the lock lever (1) at the front bottom of the seat cushion forward (1 for each side), and pull the seat cushion upward to release the wire (2) from the seat cushion hook. Then pull the seat cushion forward the remove
- Remove the seat cushion from vehicle.
2. Remove the seatback (RH).
- Remove the rear seat belt inner anchor. Removal and Installation.
- Remove the LATCH system. Removal and Installation.
- Remove the seatback control cable (RH). Removal and Installation.





- Remove the mounting nuts (A) and bolt (B).
3. Remove the seatback (LH).
- Remove the LATCH system. Removal and Installation.
- Remove the seatback control cable (LH). Removal and Installation.





- Remove the mounting nuts (A) and bolt (B).

INSTALLATION

CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.
- Always remove seat back while the reclining device is in the locked condition. Never release the locked condition after removing seat back.





1. Install the seatback (LH) mounting bolt (1) and nuts (2), (3), (4).





2. Install the seatback (RH) mounting bolts (1), (2) and nuts (3), (4)
(5), (6).
3. Install the seatback control cable. Removal and Installation.
4. Install the seat cushion.