Removal and Installation

UNIFIED METER AND A/C AMP.


Removal and Installation


REMOVAL
1. Remove the display unit. Without Navigation (without navigation), Navigation (Single Monitor) [navigation (single monitor)], or Removal and Installation [navigation
(twin monitor)].
2. Remove the unified meter and A/C amp. and AV control unit as an assembly.
3. Remove the bracket screws and remove the unified meter and A/C amp.

INSTALLATION
Install in the reverse order of removal.

NOTE:
- Unified meter and A/C amp. screws are different from other screws. Never confuse them when installing.
- Since AV control unit connector and unified meter and A/C amp. connector have the same from, be careful not insert them wrongly.