System Description

ILLUMINATION CONTROL SYSTEM


System Description


OUTLINE
Each illumination lamp is controlled by each function of BCM, IPDM E/R, total illumination control unit and combination meter.

Control by BCM
- Combination switch reading function
- Headlamp control function

Control by IPDM E/R
- Relay control function

Control by combination meter
- Meter illumination control function ( Meter System.)

Control by the total illumination control unit
- Interior room lamp control function ( System Diagram.)

ILLUMINATION CONTROL
- BCM detects the combination switch condition by the combination switch reading function.
- BCM transmits position light request signal to IPDM E/R and combination meter (through the unified meter and A/C amp.) according to tail lamp ON condition.

Tail lamp ON condition
- Lighting switch 1ST
- Lighting switch 2ND
- Lighting switch AUTO, and the auto light function ON judgment (With auto light system)
- IPDM E/R turns the integrated tail lamp relay ON according to position light request signal. It provides the power supply to each illumination lamp.
- Total illumination control unit turns each illumination (linked with hospitality lighting system) ON according to tail lamp signal from IPDM E/R.
- Combination meter enters in the nighttime mode according to position light request signal (through the unified meter and A/C amp.). Under the nighttime mode the combination meter controls each illumination brightness.
- Total illumination control unit controls each illumination (linked with hospitality lighting system) brightness according to the illumination control signal from combination meter.