Removal and Installation

CAN GATEWAY


Removal and Installation


CAUTION:
Before replacing CAN gateway, perform "READ CONFIGURATION" to save or print current vehicle specification. Description Special Repair Requirement Description, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (CAN
GATEWAY) : Description".

REMOVAL
1. Remove instrument lower panel RH. Exploded View.





2. Remove CAN gateway mounting screw (A).
3. Remove CAN gateway (1) and disconnect the connector.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Be sure to perform "WRITE CONFIGURATION" when replacing CAN gateway. .