Removal and Installation

AIR BREATHER HOSE


AWD : Removal and Installation


REMOVAL
1. Remove air breather vent from water outlet (rear).
2. Remove propeller shaft assembly (front). .
3. Remove air breather hose.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
- When installing air breather hose, be careful not to be crushed or blocked by folding or bending the hose.





- When inserting air breather hose to the air breather vent (for
A/T) (A), be sure to insert it fully until its end reaches the tube bend "R" portion.

B : Air breather vent (for transfer)

- Install air breather hose to air breather vent (for A/T) so that the paint mark is facing upward.
- Ensure clips are securely installed to brackets when installing air breather hose to brackets.