Removal and Installation

FRONT SUSPENSION MEMBER


Removal and Installation


REMOVAL
1. Remove tires with power tool.
2. At first, remove the engine and the transmission assembly with front suspension member downward.
Then separate the engine, transmission Removal and Installation.
3. Remove the following parts.
- Steering knuckle and wheel hub and bearing assembly: Exploded View.
- Steering gear assembly and hydraulic line: Exploded View, .
- Stabilizer bar and stabilizer connecting rod: Exploded View.
- Transverse link: Exploded View.
- Engine mount insulator: .

INSTALLATION
Note the following, and install in the reverse order of removal.
- Perform final tightening of bolts and nuts at the vehicle installation position (rubber bushing), under unladen condition with tires on level ground.